IPAM Neighbor discovery with Cisco ASA Firewalls
Hi all, does anybody knows if neighbor discovery or IP address scan is supported on Cisco ASA firewalls?I bought this solution a year ago, and at that time after the deployment and confguration of the...
View ArticleClik here to view.
DHCPv6 Support
Am I wrong to assume that IPAM should pull IPv6 Scopes from Windows DHCP servers? The Datasheet does not specifically say so either way. I cannot get it to work. Is it working for anyone else? We are...
View ArticlePros/Cons of WMI over SNMP polling for Windows DHCP Servers?
What are the benefits of using WMI polling over SNMP polling for monitoring Windows DHCP/DNS servers. From what I've read WMI requires significantly more resources. However since we're only talking...
View ArticleClik here to view.
DHCP Scope Full Alerts - Filter out scopes
Trying to filter out a few scopes where the number of addresses is equal to the number of ip's required. We don't care about usage stats on these scopes. We thought it would be as simple as adding in...
View ArticleClik here to view.
IPAM - Scope 100% used with all Zero MACs
Hi,I am facing a weird problem. IPAM is reporting a few subnets as 100% used, and in the MAC address field it shows 00-00-00-00-00-00 for all IPs,See attached image below:?? Neighbor scanning is...
View ArticleQuestion on alert tuning...
For the IP Manager, under Manage Advanced Alerts. Can you distinguish between laptops/desktops (which we are not concerned with) and if it is a server/other network device that goes down/unresponsive....
View ArticleFiltering Top 10 Subnets By % Used
Hi, I was wondering how I can edit out /29, /30, and /32 subnets. I don't want to know about the percent of addresses used up on these small "Device link" and 'loopback subnets". Is there a way to edit...
View ArticleIPAM Windows Credential Logon Failed
I was testing IPAM using VMWare and I setup up a DHCP server using VMWare also. I was able to add the server in NPM but when Im trying to add it in IPAM I always got the Logon Failure error. I check my...
View ArticleCannot add DNS servers to IPAM
Hello,We have two domain controllers that are DNS servers as well (1 Win2003,1 Win2008). These servers are already added as nodes and monitoring AD services and also sending user information for...
View ArticleNew IP Address Manager (IPAM) Library & Support Page!
We've updated the IP Address Manager (IPAM) - Updated April 15, 2015 support page. This serves as a one-stop shop for all your IPAM documentation, how-to's, troubleshooting, and more. You can add the...
View ArticlePros/Cons of WMI over SNMP polling for Windows DHCP Servers?
What are the benefits of using WMI polling over SNMP polling for monitoring Windows DHCP/DNS servers. From what I've read WMI requires significantly more resources. However since we're only talking...
View ArticleLayer 2 VLAN tracking
One place where we find IPAM lacking is the ability to track a VLAN with no IPs tied to it. I know that an IP Address Manager should track IPs but we have scenarios where we assign out Layer 2 VLANs...
View ArticleHas anyone successfully used the IPAM range import function successfully?
I have a case open currently because I cannot import our IP ranges using the sample spreadsheet that is presented in the UI, has anyone done this successfully and if so can you share the column headers...
View ArticleProblem adding DHCP server.
Hello allI am having problems adding a DHCP server to my IPAM installation. We are using a Windows 2003 (wmi) DHCP server and NPM 11.5 and IPAM 4.3. Its not a credential problem, I have tested the...
View ArticleClik here to view.
About IPAM
Hello.We are searching a solution to configure cable modems in docsis network. We have different types of cable modems for docsis 1, docsis2 and 3.What we are looking for is a solution to do that...
View ArticleIPAM 3.1 - Scans not running
I discovered today that IPAM is not conducting any of its scans (Subnet, DNS Zones, etc.). When I took a look at the "IPAM Settings > Scan Job Status", all of the jobs reflected the following:...
View ArticleUsing Solarwinds IPAM to monitor Bluecat Adonis appliances?
Hi, I just set up a demo version of Solarwinds IPAM software in an attempt to monitor our DHCP pools residing on multiple Bluecat Adonis 1000 boxes. I can add the node but it doesn't seem to be...
View ArticleIPAM AddIPs.zip failing
I've imported 300ish subnets from an excel spreadsheet and most of them have no IPs. While digging through the forums I found references to the AddIPs tool which I downloaded and tried to use. I was...
View ArticleHow to use subnet filters in IPAM summary
I have to use subnet filters to see all IP addresses (from 172.20.140.0/23 to 172.20.154.0/24) in IPAM summary
View Article